MMM-System
+7-498-661-92-81
+7-498-661-61-35
Metal Magnetic Memory Method
MMM-System
Metal Magnetic Memory Method
New devices
TSC-7M-16
Tester of Stress Concentration TSC-7M-16
call
TSC-8M-4
Tester of Stress Concentration TSC-8M-4
call

Electromagnetic Indicator of Cracks EMIC-1M

call
Availability:
universal

EMIC-1M - is a universal instrument used for magnetic and non-magnetic metals and alloys.

Electromagnetic Indicator of Cracks EMIC is designed for measuring of defects depth and detection of their locations during the inspection of products made of ferromagnetic and non-magnetic metals and alloys for presence of surface crack-type defects of fatigue, corrosion and process-induced nature.

Certificate of Rosstandart RU.C.27.002.A N35003.

The principle of the instrument's operation is based on measuring of the magnetic leakage field in the zone of cracks.

The EMIC instrument has a small size and equipped with self-contained power supply, wear-resistant sensor; it is easy to operate and adjust.

The instrument adjustment is performed automatically, it is necessary just to install the sensor on the test surface, press the adjustment button, and in a fraction of a second the instrument is ready for operation. During operation, when the sensor crosses the crack, the instrument generates an appropriate sound and light signal, and the size of the crack can be assessed by the readings on the instrument's LED scale.

EMIC has a number of advantages over the conventional eddy-current instruments:

  • Dressing or any other preparation of the test surface is not required
  • Cracks detection through the layer of paint or insulation up to 2 mm thick
  • Ability to operate on rough and corrosion-damaged surfaces
  • Cracks detection in conditions of inhomogeneous metal structure, for example, in the area of welds
  • No "edge effects"
Dimensions of the detected defect for magnetic metals and alloys: Ширина при Ra3,2 (Rz20) not less 0,002 mm
Length, not less 3 mm
Depth 0,2-0,7 mm
Dimensions of the detected defect for non-magnetic metals and alloys: Width at Ra3,2 (Rz20) not less 0,004 mm
Length, not less 3 mm
Depth 0,2-0,7 mm
Dimensions of the detected defect for non-ferrous metals: Width at Ra3,2 (Rz20) not less 0,004 mm
Length, not less 3 mm
Depth 0,2-0,7 mm
Admissible absolute error of the defect depth measurements ±0,1 mm
Admissible inclination between the sensor and the normal to the surface of inspection ±10°
Admissible angle between the crack and the sensor plane, not less ±30°
Sensor traverse speed relative to the specimen, not less 0,5 m/sec
Power supply from integrated storage batteries 3,3-4,2 V
Continuous operation time, not less 40 hours
Operation temperature range -10°С ... +40°С
Relative humidity range at the temperature of +30° 15% - 90%
Dimensions 120x60x20 mm
Weight 0,5 kg
News
February 01, 2017
New TSC-9M-12
Fabrication of new device - Tester of Stress Concentration TSC-9M-12
December 01, 2013
New TSC-8M-4 device
Fabrication of new device - Tester of Stress Concentration TSC-8M-4
Price List
Energodiagnostika Co. Ltd is the main developer of a principally new non-destructive testing method and inspection instruments
based on application of the method of metal magnetic memory (MMM method).
1992-2017 © Energodiagnostika Co. Ltd. All Rights Reserved
Design by: Modern Media